| Product make-up 1 |
Cube: CC72-3301 Projection engine: RPMWU-LED01 Screen options: SC72-XP01 |
| Imaging technology |
Imaging: 1-chip DLP®, Dark Chip Native resolution: WUXGA+ (1920 x 1200 - HD compatible) Illumination: Light Emitting Diodes (Red, Green, Blue) |
| Pixel density |
Pitch: 31.4 pixels per linear inch |
| Screen |
Gap: 1mm nominal gap between adjacent images/screens Types: wide angle cross prism |
| Inputs |
Standard: Digital DVI-I with analog VGA Scan rates: Horizontal: 15-120kHz, Vertical: 23.97-150Hz , Pixel clock: 165 MHz Expansion: 3 input module slots available Optional modules: VGA, Digital (DVI), Analog (RGB), dual SDI/HDSI, twin HDMI Compatibility: compatible with Christie TVC Series video wall controllers or other input sources from VGA to QXGA as well as standard HD formats |
| Illumination |
Technology: LED (RGB) LED life rating 2 : >60,000 hrs |
| Color |
Temperature range: 3200-9300K Gamut: beyond 100% EBU Adjustment and control: Screen to Screen: ArrayLOC™ automatic brightness & color management Individual: Comprehensive Color Adjustment (CCA™) |
| Optical |
Lens types: 0.69:1 low distortion, zero offset, with field curvature correction Brightness uniformity: brightness uniformity control provides up to 100% uniformity capability for critical applications Contrast ratio: >100,000:1 (full field using shutter mode); 1400:1 (full field); up to 450:1 ANSI |
| Control/networking |
Ports/controls: 2 RS-232 ports and 1 RS-422 port Field upgradable software via RS-232 network or Ethernet IR remote control GPIO port On-board ChristieNET™ connectivity (RJ45) |
| Upgradability |
Software: Christie KoRE™ 10-bit librarian communication software for field upgrade of firmware |
| Optional Accessories |
Inputs: see input option modules above Other: wired remote control, pedestal |
| Physical characteristics |
Dimensions Depth: 33" See included line drawings for additional dimensions Weight (approx.) Cube enclosure: 147lbs (67kg) Screen (XPS type): 81lbs (37kg) Light engine: 60lbs (27kg) Shipping weight (approx.) Cube enclosure: 200lbs (97kg) Screen (XPS type): 119lbs (54kg) Light engine: 68lbs (31kg) Stack-ability 3units high (call if requirements is >3 high) Service type Rear access |
| Environment |
Cube Operating temperature 3 : 40-95°F (5-35°C) Non-operating temperature: -4-122°F (-20-50°C) Humidity: 20-80% non-condensing • Storage: 35-65% non-condensing Altitude: 0-3000m (0-10,000ft) Screens Operating temperature 3 : 63-88°F (17-31°C) Non-operating temperature: -4-95°F (-20-35°C) Humidity: 40-60% non-condensing Altitude: 0-3000m (0-10,000ft) |
| Power rating (projection engine) |
Voltage: 100-240 VAC 50/60Hz Current: 4.8A Consumption: rating: 370W Dissipation (maximum): 1263 BTU/hr |
| Reliability and serviceability |
MTBF >50,000 hrs MTBF for all major modules MTTR <15 minutes with modular design • <5 minutes for lamp |
| Regulatory (projection engine) |
Directives: (EC) 2002/95/EC (RoHS) 2002/96/EC (WEEE) Regulation (EC) No. 1907/2006 (REACH) CAN/CSA C22.2 No. 60950-1 UL 60950-1 IEC 60950-1 FCC, Part 15, Subpart B, Class A EN55022/CISPR22 Class A EN55024/CISPR24 Certifications marks (check with Christie Digital Systems for latest update) cULus (Canada & US) CE (EU) CCC (China) GoST-R (Russia) KC (Korea) PSE (Japan) C-Tick (Australia & New Zealand) |
| Calibration |
All projection units are factory calibrated for best color performance |
| Limited warranty |
Two years parts and labor Contact an authorized Christie representative for full details of our limited warranty |
| Addtional features and benefits |
Integrated 6-axis adjustment system for precise geometry alignment Full-function remote keypad with easy-to-use menu system Multiple set-up memories to manage multiple input sources Picture-in-Picture capability Control and status monitoring over IP Extensive scaling capability Input spanning across multiple screens (up to 3x3)
3 x Redundant cooling fans Innovative water-filled,sealed heat pipe cooling system (maintenance free, no motorized pumps, hazardous chemicals or concern of leakage) |
DAV首页